DC Isolator Switches

There are several installation methods for DC isolation switches, depending on the specific requirements of the solar PV system. Here are some of the most common methods:

 

DC Isolator Switch

Wall-mounted: DC isolation switches can be mounted on a wall using brackets or screws. This method is suitable for systems that have a fixed location, such as rooftop solar PV systems.

 

DC Isolator Switch

Pole-mounted: DC isolation switches can be mounted on a pole using a pole-mounting kit. This method is suitable for systems that are installed in remote locations, such as off-grid solar PV systems.

dr

In-line: DC isolation switches can be installed in-line with the DC cables, either between the solar panels and the charge controller or between the charge controller and the battery bank. This method is suitable for systems that have limited space for installation, such as small solar PV systems.

DC Isolator Switch

Door Clutch-mounted

 

Enclosure-mounted: DC isolation switches can be installed in an enclosure, which is then mounted on a wall or pole. This method is suitable for systems that require additional protection against the elements, such as outdoor solar PV systems.

It is important to follow the manufacturer’s instructions and local electrical codes when installing a DC isolation switch. The switch should be installed in a location that is easily accessible for maintenance and repair work, and should be mounted securely to prevent damage or accidental operation. All wiring connections should be made according to the manufacturer’s specifications and should be performed by a qualified electrician.

Learn More:https://onccy.com/